Specifications

80 FT-1802M OPERATING MANUAL
52 TN FRQ
Function: Setting of the CTCSS Tone Fre-
quency.
Available Values: 50 standard CTCSS tones
Default: 100.0 Hz
53 TOT
Function: Sets the Time-Out Timer.
Available Values: 1MIN / 3MIN / 5MIN /
10MIN / OFF
Default: 3MIN
The time-out timer shuts off the transmitter after continuous transmission of the programmed
time.
54 TS MUT
Function: Enables/Disables the receiver audio output while the Tone Search Scanner is
activated.
Available Values: ON / OFF
Default: ON
55 TS SPD
Function: Selects the Tone Search Scanner speed.
Available Values: FAST / SLOW
Default: FAST
56 VFO.SCN
Function: Selects the VFO Scanner Width.
Available Values: ±1MHz / ±2MHz / ±5MHz / ALL
Default: ALL
±1 MHz, ±2 MHz, ±5 MHz: The scanner will sweep frequencies within the selected band-
width.
ALL: The scanner will sweep all frequencies.
57 WX ALT
Function: Enables/Disables the Weather Alert feature.
Available Values: ON / OFF
Default: OFF
58 WX VOL
Function: Selects the audio output level of the Weather Alert Tone.
Available Values: NOR.VOL / MAX.VOL
Default: NOR.VOL
“SET”
(
MENU
)
M
ODE
MENU SELECTION DETAILS
CTCSS TONE FREQUENCY
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7
82.5 85.4 88.5 91.5 94.8 97.4
100.0 103.5 107.2 110.9 114.8 118.8
123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9
171.3 173.8 177.3 179.9 183.5 186.2
189.9 192.8 196.6 199.5 203.5 206.5
210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1 ––––