Specifications

DMU-2000 DATA MANAGEMENT UNITPage 16
HOW TO USE THE WORLD CLOCK
CITY SELECTION
It is possible to enter up to 11 cities in the register. All cities in the register will be displayed on the World Clock screen.
Advice: The order of the display of the cities can be changed later; for now, please just select one of the supplied city
names.
There may only be one city shown in some countries; however, it is possible to add cities, if desired.
If you wish to add a city to the City List that was programmed at the factory, you will need to supply your own USB or PS/
2 Keyboard. If you utilize one of the pre-loaded cities, a keyboard is not necessary.
1. Press the
[
KEY3
(
CITY
)]
key while the World Map is
displayed, and the Display will show the “Area Selec-
tion” screen.
2. Use the
[
KEY1
(

)]
,
[
KEY2
(

)]
,
[
KEY3
(

)]
,
[
KEY4
(

)]
keys to select the continent in which the
desired city is located.
3. Confirm that the desired area is highlighted, and press
the
[
KEY7
(
SELECT
)]
key briefly. Now the country
list for the selected continent will be displayed.
4. Use the
[
KEY1
(

)]
,
[
KEY2
(

)]
,
[
KEY3
(

)]
,
[
KEY4
(

)]
keys to select the desired country in this
area.
5. Now press the
[
KEY7
(
SELECT
)]
key briefly, and you
will see the list of the city names in the country se-
lected.
6. Use the
[
KEY1
(

)]
,
[
KEY2
(

)]
,
[
KEY3
(

)]
,
[
KEY4
(

)]
keys to select the desired city. Even if
the city displayed is the only one in the country, select
it anyway.
7. When you have completed the above procedure, press
the
[
KEY7
(
SELECT
)]
key briefly. The selected coun-
try name and the city name will be indicated. If you
want to input a city name which is not in the list, press
the
[
KEY7
(
SELECT
)]
key. After confirming that the
city name is highlighted, enter the city name you want
from your keyboard.
8. Use the
[
KEY1
(

)]
,
[
KEY2
(

)]
,
[
KEY3
(

)]
,
[
KEY4
(

)]
keys to set “DAYLIGHT SAVING TIME
(Summer Time),” “DISPLAY MAP” (display or not
display city names on the World Clock screen), and
“HIGHLIGHT” (selects yellow or white highlighted
indication for cities).
9. When finished, press and hold in the
[
KEY7
(
SELECT
)]
key for 2 seconds to exit.


“AREA SELECTION” SCREEN
“COUNTRY SELECTION” SCREEN

[
KEY7
(
SELECT
)]
Key

[
KEY7
(
SELECT
)]
Key

[
KEY7
(
SELECT
)]
Key
“CITY SELECTION” SCREEN
MANUAL
REFERENCE
[
KEY1
(
xxx
)]
[
KEY2
(
xxx
)]
[
KEY3
(
xxx
)]
[
KEY4
(
xxx
)]
[
KEY5
(
xxx
)]
[
KEY6
(
xxx
)]
[
KEY7
(
xxx
)]
[
KEY8
(
xxx
)]
FT-950
FTDX5000
[
1.8
(
1
)]
[
3.5
(
2
)]
[
7
(
3
)]
[
10
(
4
)]
[
14
(
5
)]
[
18
(
6
)]
[
21
(
7
)]
[
24.5
(
8
)]
FT-2000
FT-2000D
[
F1
(
CH-1
)]
[
F2
(
CH-2
)]
[
F3
(
CH-3
)]
[
F4
(
CH-4
)]
[
F5
(
MEM
)]
[
F6
(
DEC
)]
[
F7
(
P.BACK
)]
[
DISPLAY
]