Specifications

DMU-2000 DATA MANAGEMENT UNITPage 30
ABOUT THE LOG BOOK
LOG BOOK FUNCTION

[
KEY1
(
FUNC
)]
Key
You may use the “CHECK” function to check the log
to see if a QSO has been made previously with the
logged station, and you may also create a summary of
QSOs by band and mode by pressing this key. The log
may be viewed solely for the current operator, or for
all operators registered into the Logbook and saved
on the CF card.

[
KEY2
(

)]
Key
Press this key to shift to the log line below the current
one.

[
KEY3
(

)]
Key
Press this key to shift to the log line above the current
one.

[
KEY4
(
EDIT
)]
Key
Press this key to enable editing of previously-stored
log data.

[
KEY7
(
SAVE/LOAD
)]
Key
Press this key to engage the screen that allows you to
manage log data to be saved.

[
KEY8
(
DISPLAY
)]
Key
Press this key briefly to switch the Function key op-
erations between the “Page Select Keys” and the
“Function Keys.”
Press and hold in this key to disable DMU-2000 con-
trol, and return the key buttons to control of the FT-
2000/D, FT-950, or FTDX5000 operations.
  
Using your keyboard (not supplied) connected to the Data
Management Unit's rear-panel KEYBOARD jack (PS/2
or USB), you can create a Log Book within the DMU-
2000, and display it on the your monitor. Date, time, fre-
quency, and mode will be automatically stored, and you
can save the log data to the Compact Flash card for archive
purposes.
If the “Log Book” screen does not initially appear, press
the
[
KEY8
(
DISPLAY
)]
key to toggle the Function key
operations to “Page Select Keys,” then press the
[
KEY4
(
LOGBOOK
)]
key briefly to display the “Log
Book” screen. Next, press the
[
KEY8
(
DISPLAY
)]
key
again to toggle the Function key operations to the “Func-
tion Keys.”
EXPLANATION OF THE FUNCTION KEYS ON THE LOG BOOK SCREEN

FT-2000/D KEYS
FT-950 KEYS
FTDX5000 KEYS