Specifications

DMU-2000 DATA MANAGEMENT UNITPage 36
LOG BOOK FUNCTION
LOADING LOG DATA
(
LOAD
)
You may load log data from a CF card into your DMU-2000 (for example, an archive copy, or a log from a different DMU-
2000 or FT DX 9000 Series Transceiver). Before starting, be sure the CF card containing the log data has been inserted
into the CF Card Slot.
1. Referring to Figure

on page 31, press the
[
KEY7
(
SAVE/LOAD
)]
key to engage the Save/Load
mode.
2. Press the
[
KEY5
(
SAVE/LOAD
)]
key to engage the
LOAD protocol.
3. Use the
[
KEY1
(

)]
and
[
KEY2
(

)]
keys to select
the file you wish to upload to the transceiver, then press
the
[
KEY6
(
GO
)]
key to load the file.
“SAVE/LOAD” MODE
SAVING LOG DATA
Log data can be saved to the supplied Compact Flash (CF) card.
1. Referring to Figure

on page 31, press the
[
KEY7
(
SAVE/LOAD
)]
key to move to the Save/Load
page.
2. Press the
[
F5
(
SAVE/LOAD
)]
key to choose the
“Save” protocol.
3. Input the desired FILE NAME, and press the
[
KEY6
(
GO
)]
key to save the data in the CF card.
Note: Be sure not to delete the file “extension” to the file
name, when entering the file name. If the extension is
missing, it will not be possible to load log data.
If the ERROR message “CF CARD IS NOT READY”
appears on the display, please confirm that the CF card is
inserted correctly into its slot.
Please note: When memory data is saved to the CF card,
any file with the same name as the current file will be
revised (overwritten), and the previous data will be de-
leted.
Advice: The user configuration protocol (CONFIG) al-
lows you to specify the file format that is used for saving
log data. The available formats are:
ADIF (
International Log Format ) ............................ adi
CSV ( Cursor-Limited Values ) ................................. csv
TXT ( Tab-Limited Values ) ....................................... txt
CABRILLO ( International Log Format ) ..... cabrillolog
“SAVE/LOAD” MODE
Advice: When entering the file name, be sure not to delete
the file “extension”. A missing extension will make it
impossible to load log data.
If the ERROR message “CF CARD IS NOT READY”
appears on the display, please confirm that the CF card is
inserted correctly into its slot.
When memory data is loaded from the CF card, the cur-
rent memories stored in the DMU-2000 will be over-writ-
ten, and the previous data is erased. We recommend that
you save and download the current memory data to the
CF card, if you want to use it again later.
MANUAL
REFERENCE
[
KEY1
(
xxx
)]
[
KEY2
(
xxx
)]
[
KEY3
(
xxx
)]
[
KEY4
(
xxx
)]
[
KEY5
(
xxx
)]
[
KEY6
(
xxx
)]
[
KEY7
(
xxx
)]
[
KEY8
(
xxx
)]
FT-950
FTDX5000
[
1.8
(
1
)]
[
3.5
(
2
)]
[
7
(
3
)]
[
10
(
4
)]
[
14
(
5
)]
[
18
(
6
)]
[
21
(
7
)]
[
24.5
(
8
)]
FT-2000
FT-2000D
[
F1
(
CH-1
)]
[
F2
(
CH-2
)]
[
F3
(
CH-3
)]
[
F4
(
CH-4
)]
[
F5
(
MEM
)]
[
F6
(
DEC
)]
[
F7
(
P.BACK
)]
[
DISPLAY
]