Specifications

DMU-2000 DATA MANAGEMENT UNIT Page 37
SUMMARY CHECK
You may do a band-by band, a mode-by mode, or an “all log” summary of your log data.
MODE-BASED SUMMARY CHECK
1. Referring to Figure

on page 31, press the
[
KEY5
(
SUMMARY
)]
key to bring up the “SUM-
MARY MODE” page, and you may then press the
[
KEY2
(
MODE-SEL
)]
key and select the desired
mode, using the keyboard’s arrow
([

] or [

])
keys.
2. When you press the
[
KEY6
(
RUN
)]
key, the summary
list for the selected mode will be displayed.
3. Use the
[
KEY4
(

)]
and
[
KEY5
(

)]
keys to scroll
through the summary list.
OPERATOR-BASED SUMMARY CHECK
1. Referring to Figure

on page 31, press the
[
KEY5
(
SUMMARY
)]
key to display the “SUM-
MARY MODE” page, then press the
[
KEY3
(
OP-
SEL
)]
key and then use the keyboard arrow
([

] or
[

])
keys to select “ALL-OP” or “CURRENT OP”
as desired.
ALL-OP: All log data from all the registered
operators will be displayed.
CURRENT OP: Only the log data from the current
operator will be displayed.
2. Press the
[
KEY6
(
RUN
)]
key to display the summary
list for the selected operator, or all operators.
3. Use the
[
KEY4
(

)]
and
[
KEY5
(

)]
keys to scroll
through the summary list.
“SUMMARY MODE” PAGE
LOG BOOK FUNCTION
Note: The Summary Check function requires that “NOR-
MAL” be selected as the “Log Type” before you start,
and only logs containing the PREFIX may be used for
this function.
Files saved in either “.CSV” or “.TXT” formats are ca-
pable of letting you perform the “Summary Check” func-
tion.
MANUAL
REFERENCE
[
KEY1
(
xxx
)]
[
KEY2
(
xxx
)]
[
KEY3
(
xxx
)]
[
KEY4
(
xxx
)]
[
KEY5
(
xxx
)]
[
KEY6
(
xxx
)]
[
KEY7
(
xxx
)]
[
KEY8
(
xxx
)]
FT-950
FTDX5000
[
1.8
(
1
)]
[
3.5
(
2
)]
[
7
(
3
)]
[
10
(
4
)]
[
14
(
5
)]
[
18
(
6
)]
[
21
(
7
)]
[
24.5
(
8
)]
FT-2000
FT-2000D
[
F1
(
CH-1
)]
[
F2
(
CH-2
)]
[
F3
(
CH-3
)]
[
F4
(
CH-4
)]
[
F5
(
MEM
)]
[
F6
(
DEC
)]
[
F7
(
P.BACK
)]
[
DISPLAY
]