Specifications

DMU-2000 DATA MANAGEMENT UNIT Page 47
ABOUT THE MEMORY CHANNEL LIST
USING THE MEMORY CHANNEL LIST

[
KEY2
(
LOAD
)]
Key
Press this key to load memory data previously saved
on the CF card to the DMU-2000.

[
KEY3
(
SAVE
)]
Key
Press this key to save the current memory data to the
CF card.

[
KEY5
(
MASK/RESTORE
)]
Key
It is possible to erase the currently selected memory
channel data by pressing this key. If you want to re-
store the erased memory data, press this key again af-
ter erasing the memory.

[
KEY6
(

)]
Key
Use this key to move the highlighted field on the
memory list downward.

[
KEY7
(

)]
Key
Use this key to move the highlighted field on the
memory list upward.

[
KEY8
(
DISPLAY
)]
Key
Press this key briefly to switch the Function key op-
erations between the “Page Select Keys” and the
“Function Keys.”
Press and hold in this key to disable DMU-2000 con-
trol, and return the key buttons to control of the FT-
2000/D, FT-950, or FTDX5000 operations.
This is the screen which displays the transceiver’s memory
channels. On the list, the channel number, ID tag, fre-
quency, and operating mode are shown. The transceiver
has an extensive memory system of 99 channels that may
be arrayed into up to six groups, and you can check the
entire memory system’s status by viewing this screen.
If the “Memory Channel List” screen does not initially
appear, press the
[
KEY8
(
DISPLAY
)]
key to switch the
Function key’s function to “Page Select Key,” then press
the
[
KEY7
(
MCH LIST
)]
key momentarily to display the
“Memory Channel List” screen. Next, press the
[
KEY8
(
DISPLAY
)]
key again to switch the Function
key’s function to the “Function Key.”
EXPLANATION OF THE FUNCTION KEYS ON THE MEMORY CHANNEL LIST SCREEN
 
FT-2000/D KEYS
FT-950 KEYS
FTDX5000 KEYS