Specifications

DMU-2000 DATA MANAGEMENT UNIT Page 5
KEY BOARD Jack
Connect your keyboard (not supplied) to one of these
jacks in accordance with your keyboard type (“USB”
or “PS/2”). Use the keyboard to input logbook data,
and to input your location when setting up the World
Clock.
AUDIO OUT Jack
This jack is for future expansion of the Data Manage-
ment Unit’s capabilities, but at this time it is not sup-
ported.
AUDIO IN Jack
This jack is audio signal input for the Audio Scope
display of the DMU-2000.
You can observe the audio wave of a signal provided
by external equipment connected to this jack.
USB Jack
This jack supports the USB 1.1 protocol, for connec-
tion of a USB keyboard.
Note: Other types of USB-related accessories (other
than a keyboard) are not supported by this jack, and
must not be connected here.
DISPLAY Jack
Connect an external monitor (not supplied) to this jack.
SWITCHES AND CONNECTORS
SPECIFICATIONS
Supply Voltage: 100 VAC ~ 240 VAC, 50 ~ 60 Hz (Universal)
Power Consumption (Approx.): 50 VA
Dimensions (WxHxD): 3.9” x 5.3” x 13.8” (100 x 135 x 350 mm)
Weight (Approx.): 5.9 lbs (2.7 kg)
PACKAGING LIST
DMU-2000 1 pc
SCOPE Unit 1 pc
CF Card 1 pc Q9000855 (128 MB)
AC Power Cord 1 pc T9017882: USA
T9013285: Europe
T9013283A: Australia
Connection Cable 1 pc T9101560
Spare Fuse 1 pc Q00000096 (3.15A)
Screws 4 pcs U03306002 (ASM3X6NI)
Operation Manual 1 pc
Warranty Card 1 pc
When you store the data onto the CF card, please
use the CF card that is included with the DMU-
2000 package. If you want to use a CF card other
than the one supplied by YEASU, you may need
to format the card on a Windows PC by using the
FAT16 or FAT32 option.