Specifications

Page 86 FT-950 OPERATING MANUAL
CW CONVENIENCE FEATURES
CONTEST MEMORY KEYER
(
USING THE OPTIONAL FH-2 REMOTE CONTROL KEYPAD
)
CHECKING THE CW MEMORY CONTENTS
1. Be sure that Break-in is still turned “Off” by the
[
BK-IN
]
key.
2. Press the
[
MONI
]
button to enable the CW monitor.
The “ ” icon will appear in the display.
3. Press an FH-2
[
1
]
~
[
5
]
key, whichever one you just
recorded in. You will hear the results in the sidetone,
but no RF energy will be transmitted.
NOTE:
You may adjust the monitor level using the
[
MONI
]
knob.
ON-THE-AIR CW MESSAGE PLAYBACK
1. Press the
[
BK-IN
]
button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item “
043 A1A BK-IN043 A1A BK-IN
043 A1A BK-IN043 A1A BK-IN
043 A1A BK-IN”.
2. Press an FH-2
[
1
]
~
[
5
]
key, depending on which CW
Memory Register message you wish to transmit. The
programmed message will be transmitted on the air.
NOTE:
If you subsequently decide to use the “Message Memory”
technique for memory storage, please note that the con-
tents of a message stored using text input will not be trans-
ferred over when you set entry to “Message Memory tech-
nique” on a particular memory register (the Menu Mode
Setting is set to “
tyP2tyP2
tyP2tyP2
tyP2”).
Decrementing the Contest Number
Use this process if the current contest number gets
slightly ahead of the actual number you want to
send (in case of a duplicate QSO, for example).
Press the FH-2
[
DEC
]
key momentarily. The cur-
rent Contest Number will be reduced by one. Press
the FH-2’s
[
DEC
]
key as many times as necessary
to reach the desired number. If you go too far, use
the “Contest Number Programming” technique de-
scribed previously.
LOCK
OFFON
LOCK
OFFON
LOCK
OFFON