Specifications

Page 89FT-950 OPERATING MANUAL
FM MODE OPERATION
TONE SQUELCH OPERATION
You may also use “Tone Squelch” whereby your receiver will be kept silent until an incoming signal modulated with a
matching CTCSS tone is received. Your receiver’s squelch will then open in response to the reception of the required tone.
1. Rotate the Main tuning Dial to the output frequency
(downlink) from the repeater.
2. Press and hold in the
[
AM/FM
]
button for one second
to engage the CTCSS mode.
3. Rotate the Main Tuning Dial to choose “
TSTS
TSTS
TS” from the
available choices of
“
OFFOFF
OFFOFF
OFF” Æ “
TNTN
TNTN
TN (Tone Encoder)”
Æ “
TSTS
TSTS
TS (Tone Squelch)” Æ “
OFFOFF
OFFOFF
OFF”
4. Rotate the
[
CLAR/VFO-B
]
knob to select the desired
CTCSS Tone to be used. Fifty standard CTCSS tones
are provided (see the CTCSS Tone Chart).
5. Press and hold in the
[
AM/FM
]
button for one second.
A “
DD
DD
D” notation on the “10 Hz” frequency digit in the
display will indicate that the Tone Decoder is engaged.
A “
TT
TT
T” notation on the “10 Hz” frequency digit while
transmitting will indicate that the Tone Squelch is en-
gaged.
ADVICE:
The Tone Squelch operation will be memorized indepen-
dently on each VFO stack of the VFO-A and VFO-B.
[
MODE
]
Button
[
CLAR/VFO-B
]
Knob
Main Tuning Dial Knob
[
MOX
]
Button