Specifications

Page 90 FT-950 OPERATING MANUAL
CONVENIENT MEMORY FUNCTIONS
The FT-950 contains ninety-nine regular memories, labeled “
0101
0101
01” through “
9999
9999
99”, nine special programmed limit memory
pairs, labeled “
P1LP1L
P1LP1L
P1L/
P1UP1U
P1UP1U
P1U” through “
P9LP9L
P9LP9L
P9L/
P9UP9U
P9UP9U
P9U”, and five QMB (Quick Memory Bank) memories, labeled “
C-1C-1
C-1C-1
C-1” through
“
C-5C-5
C-5C-5
C-5”. Each stores various settings, in addition to the VFO-A frequency and mode (See below). By default, the 99 regular
memories are contained in one group; however, they can be arranged in up to six separate groups, if desired.
QUICK POINT:
The FT-950’s memory channels store the following data (not just the operating frequency):
 VFO-A Frequency
 VFO-A Mode
 Clarifier status and its Offset Frequency
 ANT status
 IPO status
 Roofing filter status and its Bandwidth
 Attenuator status
 Noise Blanker status
 IF SHIFT and WIDTH status
 CONTOUR status and its Peak Frequency
 DSP Noise Reduction (DNR) status and its Reduction algorithm selection.
 DSP Notch filter (NOTCH) status
 NAR bandwidth status
 DSP Auto Notch filter (DNF) status
 Repeater Shift Direction and Shift Frequency
 CTCSS status and Tone Frequency
MEMORY OPERATION
QMB MEMORY CHANNEL
REGULAR MEMORY CHANNELS
PMS MEMORY CHANNELS
01
97
P-7L/7U
P-6L/6U
P-5L/5U
P-4L/4U
02
98 P-8L/8U
03
99 P-9L/9U
P-1L/1U
P-2L/2U
P-3L/3U