Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
Advanced Feature: You may also lock out the PTT key when the LOCK mode is
activated via the Menu Item “F24 PTT LOCK.” See page ??.
Advanced Operation
Display Brightness
The FTM-10R display illumination has been specially engineered to provide high
visibility with minimal disruption of your “night vision” while you are driving. The
brightness of the display is manually adjustable, using the following procedure:
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
2. Rotate the DIAL knob to select Menu Item “F14 DIMMER.”
3. Press the [X] key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select a comfortable brightness level
(MIN/LOW/NOR/HIGH/MAX).
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
Key Beeper
A key beeper provides useful audible feedback whenever a key is pressed. If you want to
turn the beeper off (or back on again):
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
2. Rotate the DIAL knob to select Menu Item “F5 BEEP.”
3. Press the [X] key to enable selection of this Menu Item.
4. Rotate the DIAL knob to change the setting to “OFF.”
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
6. To return the beep back on again, select “KEY” or “KEY+SC (factory default)” in
step 4 above.
KEY: The beeper sounds when you press the key.
KEY+SC: The beeper sounds when you press the key, or when the scanner stops.
Channel Step Selection
Tuning steps are factory preset to default increments which are appropriate for the
country to which this radio is exported. You may have a reason to use a different step
size, however, and here is the procedure for changing the channel steps:
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
Vertex Standard Co., Ltd.
14