Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
2. Rotate the DIAL knob to select Menu Item “F39 STEP.”
3. Press the [X] key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select desired step size
(5.00/6.25/8.33/10.00/12.50/15.00/20.00/25.00/50.00/100.00/200.00 kHz or AUTO).
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
Note: 1) AM BC band only choose 9 kHz and 10 kHz.
2) FM BC band only choose 50 kHz, 100 kHz, and 200 kHz.
3) Can not choose 5 kHz, 6.25 kHz, 8.33kHz, and 9 kHz selection at frequency above 470
MHz.
Audio Pitch Control
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
2. Rotate the DIAL knob to select Menu Item “F2 AF PITCH.”
3. Press the [X] key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select desired receiver audio response. Available selections
are BASS-3, BASS-2, BASS-1, NORMAL, TREBLE-1, and TREBLE-2.
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
Public Address/Horn Alert Operation
The FTM-10R includes a unique feature which allows the transceiver to be used as a 10
W Public Address/Horn Alert when an optional MLS-200-M10 External Speaker is
connected.
1. Press the top panel’s [TOPT]/[TOPS] key to select the one of the five function
descried below:
PA: Outputs your amplified voice.
HORN 1: Sounds a Gong Bell.
HORN 2: Sounds a flight sound of a UFO.
HORN 3: Sounds a klaxon.
HORN 4: Sounds an ambulance siren.
Note: The “INTERCOM” and “SCAN” functions are not the function of the Public
Address/Horn Alert Operation. Describes detail later.
2. Press the [F] key to set the function which selected by above step.
3. Press the [F] key again to activate the function which selected by above step, then
Vertex Standard Co., Ltd.
15