Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
press the PTT key to sound the voice/sound from the external speaker.
4. On the PA mode, when speak into the microphone while pressing the PTT key,
outputs your amplified voice from the external speaker.
5. Rotate the DIAL knob control the AF output level.
Note: You may exclude the five functions which is listed above from a list which is by a
Menu Item “F17 FNC KEY” individually.
Clock/Timer Operation
The FTM-10R also includes a Clock and Stop Watch Timer.
To activates the Clock and Stop Watch Timer:
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
2. Rotate the DIAL knob to select Menu Item “F9 CLOCK.”
3. Press the [X] key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select “ON.”
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
When the Clock and Stop Watch Timer is activated, you can see the Clock/Timer mode
between the “Transceiver/Volume mode” and “Transceiver/Frequency mode” while
selecting the operation mode by pressing the front panel’s [SELECT] key.
Transceiver/Frequency mode  Transceiver/Volume mode  Clock/Timer mode 
Transceiver/Frequency mode …
In the Clock/Timer mode, rotate the DIAL knob to select you may select the operation:
Clock  Stop Watch Timer  Stop Watch Timer (Sum)  Current temperature inside
the transceiver’s body  Clock …
Adjusting the Calendar
1. Press the [SELECT] key repeatedly to recall the Clock/Timer mode.
2. Press and hold the [SELECT] key for one second to activate the Clock/Timer
Customization mode.
3. Rotate the DIAL knob to select Menu Item “T1 CALENDER.”
4. Press the [X] key to enable selection of this Menu Item.
5. Press and hold the [X] key. You will notice the “YEAR” column blinking. Rotate the
DIAL knob to select the current year.
6. Press the [BANDS] key to move the blinking column to “MONTH.” Rotate the
DIAL knob to select the current month.
Vertex Standard Co., Ltd.
16