Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
7. Repeat above step regarding the “DAY,” “DAY OF WEEK,” “CLOCK,” “MINUTE,”
and “SECOND.”
8. When adjust of “SECOND” is finish, press the [BANDS] key. If you want to alarm
which sound every “00” minute, rotate the DIAL knob to change “OF” into “ON.”
9. Now, press the [BANDS] key to save the new setting and exit to Clock/Timer mode.
Note: 1) You may adjust the “CLOCK” and “MINUTE” via Menu Item “T2 TIME ADJ”
as well.
2) You may set the alarm function via Menu Item “F10 CLOCK BP” as well.
3) You may set the clock to “XX:00:00” by press and holding the [X] key for one second
when the FTM-10R is in Clock/Timer mode.
Calendar Customization
The FTM-10R enables to select the calendar format and clock format.
1. Press the [SELECT] key repeatedly to recall the Clock/Timer mode.
2. Press and hold the [SELECT] key for one second to activate the Clock/Timer
Customization mode.
3. Rotate the DIAL knob to select Menu Item “T7 APO.”
4. Press the [X] key to enable selection of this Menu Item.
Rotate the DIAL knob to select desired time period after which the radio will
automatically shout down.
5. Now, press the [SELECT] key to save the new setting and exit to Clock/Timer mode.
Using the Stop Watch Timer
1. Press the [SELECT] key repeatedly to recall the Clock/Timer mode.
2. Rotate the DIAL knob to select the Stop Watch Timer.
3. The Stop Watch Timer is designed to Start and Stop repeatedly whenever you press
the [X] key. The LED at the left of the DIAL knob blinks green while count the Stop
Watch Timer.
4. Press and hold the [X] key for one second to resets the Stop Watch Timer.
5. Rotate the DIAL knob one click clockwise to appear the sum time of a Stop Watch
Timer.
6. If you reset the sum time of a Stop Watch Timer, press and hold the [X] key for one
second.
Interval Timer
The FTM-10R’s Stop Watch Timer allows inform the progress of time which you
Vertex Standard Co., Ltd.
17