Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
operation.
When you are called by a station whose transceiver is sending a CTCSS tone, DCS code,
or CTCSS code pair which matches that set into your Decoder, the Bell will ring in
accordance with this programming.
Split Tone Operation
The FTM-10R can be operated in a “Split Tone” configuration, to enable operation on
repeaters using a mix of both CTCSS and DCS control via the Menu (Set) mode.
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
2. Rotate the DIAL knob to select Menu Item “F37 SQL.EXPND.”
3. Press the [X] key to enable selection of this Menu item.
4. Rotate the DIAL knob to set this Menu item to “ON” (to enable the Split Tone
feature)
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
When the Split Tone feature is activated, you can see the following additional
parameters following the “DCS” parameter (while selecting the tone mode by Menu
item “F38 SQL TYPE”):
DCS ENC: DCS Encode only (the “DCS” icon will blink during operation)
TONE DCS: Encodes a CTCSS Tone and Decodes a DCS code (the “T” icon will blink
and the “DCS” icon will appear during operation)
DCS TSQL: Encodes a DCS code and Decodes a CTCSS Tone (the “TSQ” icon
Memory Operation
A wide array of memory resources is available on the FTM-10R. A total of 500 memories
are available, and each may be appended with an alpha-numeric label of up to eight
characters, for quick channel recognition.
Memory Storage
To store a frequency into memory:
1. In the VFO mode, select the desired frequency, repeater shift, CTCSS/DCS tone,
and TX power level.
2. Press and hold in the [X] key for one second. A “MIN” notation will appear in the
display and the frequency display will blink.
3. Within five seconds of pressing the [X] key, press the [X] key again, this time
Vertex Standard Co., Ltd.
24