Manualshelf

Specifications

ManualsBrandsVertex Standard ManualsConsumer electronicsFTM-10SR
21222324252627282930
FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
3. Rotate the DIAL knob to select Menu Item “M3 MEM SORT.”
4. Press the [X] key momentarily, to appear the confirmation message (“SORT ?”) on
the LCD.
5. Press and hold the [X] key to appear the message (“SORTING”) on the LCD, then
the FTM-10R is reset automatically and sorting is complete.
Labeling Memory
You may wish to append an Alpha-Numeric “Tag” (label) to a memory or memories, to
aid in recollection of the channel’s use (such as a club name, etc.). This is easily
accomplished using the Set (Menu) mode.
1. Recall the memory channel on which you wish to append a label.
2. Press and hold the [X] key to enter the Memory Channel Customization mode.
3. Rotate the DIAL knob to select Menu Item “M4 NAME.”
4. Press the [X] key momentarily, then rotate the DIAL knob to select “ALPHA.”
5. Press and hold the [X] key to clear any previous label.
6. Rotate the DIAL knob to select the first digit of the desired label.
7. Press the [BANDS] key to move to next character.
8. Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of eight characters may be used in the creation of a label.
9. If you mistake, press the [BANDT] key to back-space the cursor, then re-enter the
correct letter, number, or symbol.
10. When you have programmed a label which is under eight characters, press and hold
in the [X] key to confirm the label (if the label is exactly eight characters in length,
you do not need to press and hold in the [X] key).
11. Press the [SELECT] momentarily to save the label and return to the memory recall
mode with labeled (Alpha-Numeric Tag) display.
To disable the Alpha-Numeric Tag (enabling the frequency display):
1. Recall the memory channel on which you wish to frequency display.
2. Press and hold the [X] key to enter the Memory Channel Customization mode.
3. Rotate the DIAL knob to select Menu Item “M4 NAME.”
4. Press the [X] key momentarily, then rotate the DIAL knob to select “FREQ.”
5. Press the [SELECT] momentarily to return to the memory recall mode with
frequency display.
Scan Type
Vertex Standard Co., Ltd.
27