Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
4. Rotate the DIAL knob to select Menu Item “M11 TX FREQ.”
5. Press the [X] key momentarily, then rotate the DIAL knob to select “S-DUPLEX”).
You may notice a “RPTR –” and “RPTR +” indication on the display while you rotate
the DIAL knob still more, these are Standard Repeater Shift operation which was
discussed on page ??.
6. Press the [SELECT] momentarily to save the new setting and return to the memory
recall mode.
Whenever you recall a memory which contains independently-stored transmit and
receive frequencies, the “–+” indication will appear in the display.
Transmitter Power Level
The FTM-10R enables to set the Transmitter Power Level every memory channel
individually.
1. Recall the memory channel on which you wish to set the Transmitter Power Level.
2. Press and hold the [X] key to enter the Memory Channel Customization mode.
3. Rotate the DIAL knob to select Menu Item “M12 TX POWER.”
4. Press the [X] key momentarily, then rotate the DIAL knob to select desired
Transmitter Power Level (“LOW,” “MID,” or “HIGH”).
5. Press the [SELECT] momentarily to save the new setting and return to the memory
recall mode.
Deleting Memory
You may delete certain memorized data (except CLUB memory channel) of the
FTM-10R memories.
1. Recall the memory channel on which you wish to delete.
2. Press and hold the [X] key to enter the Memory Channel Customization mode.
3. Rotate the DIAL knob to select Menu Item “M13 DELETE.”
4. Press the [X] key momentarily to appear the confirmation message (“DELETE ?”)
on the LCD.
5. Press and hold the [X] key for one second. The display will revert to “CLUB”
memory channel.
Note: Once deleted, the channel data can not be recovered.
Scanning
Vertex Standard Co., Ltd.
29