Specifications
FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
5. Press the [SELECT] key momentarily to save the new setting and exit to normal
operation.
6. Now, initiate the scanner (press the [TOPT]/[TOPS] key repetitively, until the
“SCAN” notation appears on the display, then press the [F] key). Only
7. To cannel the Preferential Memory Scanning, select “ALL MEM” in step 4 above.
Priority Channel Scanning (Dual Watch)
The FTM-10R’s scanning features include a two-channel scanning capability which
allows you to operate on a VFO or Memory channel while periodically checking a CLUB
channel for activity. If a station is received on the CLUB channel which is strong enough
to open the Squelch, the scanner will pause on that station in accordance with the
Scan-Resume mode. This feature is very useful when operate the Message feature
which is describe on next chapter.
Here is the procedure for activating Priority Channel Scanning (Dual Watch):
1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.
2. Rotate the DIAL knob to select Menu Item “F14 DUAL MIX.”
3. Press the [X] key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desired operating mode:
OFF: Disable the Priority Channel Scanning (Dual Watch).
AUTO: The Priority Channel Scanner will hold for five seconds, then will resume
when the carrier drops at the CLUB channel.
MANUAL: The Priority Channel Scanner will stop when a signal is received at the
CLUB channel, and will not restart.
BAND MIX: The Priority Channel Scanner will stop when a signal is received at
the CLUB channel, and will not restart. The audio signals from both the current
frequency and the Priority Channel output from the speaker with mixed. This
selection is very useful.
5. Press the [SELECT] key momentarily to save the new setting and activates the
Priority Channel Scanning (Dual Watch). The “PRI” icon will appear on the display.
6. To cancel Priority Channel Scanning (Dual Watch), select “OFF” in step 4 above.
Message Feature
The FTM-10R provides the Message Feature which is send messages to a friend or any
group of stations that are set up for message reception.
The Message Feature requires that all the members (1) store the same messages into
Vertex Standard Co., Ltd.
33