Specifications

FCC ID: K6620275X40

IC ID: 511B-20275X40

FTM-10R Operating Manual

the message slot, (2) store the same member list into the member box, and (3) store the

desired coordination frequency into the CLUB channel.

Preparations

Programming a Message (requires all members set the same message into the same

message slot with the same order.)

The FTM-10R has 20 message slots, including 11 factory-programmed messages for

convenient recall, as shown below. The factory-programmed messages of course can be

overwritten at any time with personalized message.

1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.

2. Rotate the DIAL knob to select Menu Item “F21 MESSAGE.”

3. Press the [X] key to enable selection of this Menu Item.

4. Rotate the DIAL knob to select the desired Message slot which your member wishes

store a message. The LCD displays the previously-stored message.

5. Press and hold the [X] key for one second to clear any previously message.

6. Rotate the DIAL knob to select the first character of the message you wish to store,

then press the [BANDS] key momentarily to save the first character of the

message and move on to the next place.

7. Repeat previous step to complete the message. If you a mistake, press the

[BANDT] key to move back to the incorrect character, then re-enter the correct

character.

8. When the Message entry is complete, press and hold in the [X] key for one second.

9. If you wish to store another message, repeat steps 4 through 8 above.

10. Press the [SELECT] key momentarily to save the new setting and exit to normal

operation.

Programming a Member List (requires all members set the same member list into the

same member box with the same order.)

We recommend that use a call sign for member list.

1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.

2. Rotate the DIAL knob to select Menu Item “F20 MEMBER.”

3. Press the [X] key to enable selection of this Menu Item.

4. Rotate the DIAL knob to select the desired member box (1 ~ 20) which your

members wishes store a member list. The LCD displays the previously-stored

member ID.

5. Press and hold the [X] key for one second to clear any previously personal ID.

Vertex Standard Co., Ltd.