Specifications

FCC ID: K6620275X40

IC ID: 511B-20275X40

FTM-10R Operating Manual

4. Rotate the DIAL knob to until “CODE” appears on the display; this activates the

WIRES

with the SRG mode. The “%” icon will appear on the display.

5. Press and hold the [X] key for one second, then rotate the DIAL knob while to select

the access number (“CODE 0” ~ “CODE 9,” “CODE A,” “CODE B,” “CODE C,”

“CODE D,” “CODE E(*),” “CODE F(#))” corresponding to the WIRES

node to

which you wish to establish the WIRES

(ask the node or repeater owner/operator

if you don’t know the access number in the network).

6. Press the [SELECT] key momentarily to save the new setting and exit to normal

operation.

7. With the Internet Connection feature activated (as in step 4 above), the FTM-10R

will generate a brief (0.1 second) DTMF tone according to your selection in step 5.

This DTMF tone is sent at the beginning of every transmission to establish or

maintain the link to the local WIRES

node operating in the SRG mode.

8. To disable the Internet Connection feature, just repeat the above procedure,

rotating the DIAL knob to select “OFF” in step 4 above (the “%” icon will disappear

from the display).

Note: If other users report that you always have a DTMF “beep” at the beginning of

each transmission, and you are not operating in conjunction with Internet access,

disable this function via step (4) above.

FRG (“Friends’ Radio Group”) mode

You may access other Internet Link Systems (including WIRES

in the “FRG” mode)

that use a DTMF string for access.

Programming the FRG code

Load the DTMF tones which you wish to use for Internet-link access into a DTMF

memory register. For purposes of this example, we will use “#(F)1101D” as the access

code (the “#” key is denoted by the letter “F”).

1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.

2. Rotate the DIAL knob to select Menu Item “F15 DTMF.”

3. Press the [X] key to enable selection of this Menu Item.

4. Rotate the DIAL knob to select the DTMF memory register (D1 ~ D9) into which

you wish to store the access code.

5. Press and hold the [X] key for one second. The first digit will blink.

6. Rotate the DIAL knob to select “F” (representing DTMF “#” the first digit of the

DTMF string).

Vertex Standard Co., Ltd.