Specifications

FCC ID: K6620275X40

IC ID: 511B-20275X40

FTM-10R Operating Manual

7. Press the [BANDS] key momentarily to accept the first digit and move to the

second digit of the DTMF string.

8. Repeat the previous steps until you have completed the access code (“#(F)1101D”).

9. If you make a mistake, press the [BANDT] key to back-digit the cursor, then

re-enter the correct number.

10. Press and hold the [X] key for one second to save the new setting.

11. Repeat steps 1 through 10 to store other access codes, if so desired.

12. Press the [SELECT] key to save the setting and exit to normal operation.

Operation (Accessing an FRG Node)

1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.

2. Rotate the DIAL knob to select Menu Item “F50 WIRES.”

3. Press the [X] key to enable selection of this Menu Item.

4. Rotate the DIAL knob to until “MEM” appears on the display; this activates the

WIRES

with the FRG mode. The “%” icon will appear on the display.

5. Press and hold the [X] key for one second, then rotate the DIAL knob select the

Internet Memory register number (D1 ~ D9) corresponding to the Internet link

repeater to which you wish to establish an Internet link.

6. Press the [SELECT] key momentarily to save the new setting and exit to normal

operation.

7. Once the Internet Connection feature is activated per step 4 above, you may now

press the [BANDS] key, while you are transmitting, to send out the selected DTMF

string (to establish the link to the desired Internet-link mode).

8. To return to the SRG mode, repeat steps 1 - 4 above, selecting “SRG” in step 4, then

press the [SELECT] key momentarily to save the new setting and exit to normal

operation.

9. To disable the Internet Connection feature, repeat steps 1 - 4 above, selecting “OFF”

in step 4, then press the [SELECT] key momentarily to save the new setting and

exit to normal operation (the “%” icon will disappear from the display).

Smart Search

Operation (Requires the optional MH-68A6J)

The Smart Search feature allows you to load frequencies automatically according to

where activity is encountered by your radio. When Smart Search is engaged, the

transceiver will search above and below your current frequency, storing active

frequencies as it goes (without stopping on them even momentarily); these frequencies

Vertex Standard Co., Ltd.