Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
are stored into a special Smart Search memory band, consisting of 31 memories (15
above the current frequency, 15 below the current frequency, plus the current frequency
itself). All channels where activity is present will be loaded into the Smart Search
memories; whether or not all 31 memories are filled, the search will stop after one
sweep in each direction.
Storing Smart Search Memories
1. Assign the Smart Search feature to the microphone’s [PGM] key, per the discussion
on page ??.
2. Set the radio to the VFO mode. Be sure that you have the Squelch adjusted
properly (so that band noise is quieted).
3. Press the microphone’s [PGM] key to begin Smart Search scanning.
4. As active channels are detected, they will automatically be stored into the Smart
Search memory bank without causing the sweep to halt.
5. The Smart Search scan will eventually terminate, and the LCD will revert to Smart
Search Memory Channel “<C>.”
6. To recall the Smart Search memories, just rotate the DIAL knob (or press the
microphone’s [UP]/[DWN] key) to choose from among the Smart Search memories.
7. To return to normal operation, press the microphone’s [PGM] or front panel’s [X]
key.
Note: 1) Smart Search is a great tool when visiting a city for the first time. You don’t
need to spend hours looking up repeater frequencies from a reference guidebook; just
ask your FTM-10R where the action is!
2) The Smart Search memories are so-called “soft” memories; they will be lost if you
initiate s new Smart Search d¥sweep of the band, of if you switch to the VFO or
Memory mode.
ARTS
TM
Operation (Requires the optional MH-68A6J)
The ARTS feature uses DCS signaling to inform both parties when you and another
ARTS equipped station are within communications range. This may be particularly
useful during Search-and Rescue situations, where is important to stay in contact with
other members of your group.
Both stations must set up their DCS codes to the same code number, then activate their
ARTS feature using the command appropriate for their radio. Alert ringers may be
activated, if desired.
Vertex Standard Co., Ltd.
39