Specifications

FCC ID: K6620275X40

IC ID: 511B-20275X40

FTM-10R Operating Manual

will appear in the display for a moment (thus enabling the DTMF Autodialer).

While the DTMF Autodialer is activated, the “TELEPHONE” icon will appear on the

LCD.

Note: The “DT CODE” indication is Manual DTMF Tone Generation mode, described

previously.

In the Autodialer mode, which you just engaged, first press the PTT key, then press the

microphone’s numeric key ([1] through [9]) corresponding to the DTMF memory string

you wish to send. Once the string begins, you may release the PTT key, as the

transmitter will be held “on the air” until the DTMF string is completed.

Note: In the FTM-10R, the DTMF sending speed and DTMF delay time (between the

time our transmitter is keyed and the first DTMF digits is sent) are fixed. The DTMF

sending speed is 50 msec (20 digits per second), and DTMF delay time is 450 msec.

Miscellaneous Setting

Programming the Key Assignments

In the factory default, the optional MH-68A6J Microphone’s [PGM] key functions have

been assigned to the “WX CH.” This may be changed by the user, if you wish to assign

quick access to another function.

To change the assignments for the MH-68A6J Microphone’s [PGM] key:

1. Press and hold the [SELECT] key for one second to activate the Menu (SET) mode.

2. Rotate the DIAL knob to select Menu Item “F23 PRGM KEY.”

3. Press the [X] key to enable selection of this Menu item.

4. Rotate the DIAL knob to select the function you wish to assign to the [PGM] key.

The available choices:

TX LOW: Selects the Transmitter Power Level.

RPTR: Sets the Repeater Shift Direction.

SQL TYP: Selects the CTCSS/DSC Operation.

REV: Reverses the Transmit and receive frequency during split-frequency

operation.

TSQLF: Selects the CTCSS frequency.

DCODE: Selects the DCS code.

MONI: Disable the noise and tone squelch systems.

T CALL: Activates 1750 Hz Tone Burst

SSCH: Engages the Smart Search operation.

Vertex Standard Co., Ltd.