Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME 3S/5S/10S: The scanner will hold for selected resume time, then resume whether
or not the other station is still transmitting.
Set Mode Item [F27 RPT MOD]
Function: Sets the Repeater Shift Direction.
Available Values: RPTR OFF/RPTR -/RPTR +
Default: Depends on the transceiver version, as well as the setting of Set Mode Item [F3
ARS].
Set Mode Item [F28 RX MODE]
Function: Selects the receiving mode.
Available Values: AUTO/WIDE FM/FMNARR FM/AM
Default: AUTO
Set Mode Item [F29 SCN.RANGE]
Function: Selects the Scan range.
Available Values: IN BAND/HAM BAND
Default: IN BAND
IN BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz Amateur
Band to be an independent band and scan these when the scan mode is engaged.
Activate the scanner on the 144 MHz Amateur Band only (or 430 MHz Amateur Band
only).
HAM BAND: The FTM-10R considers the 144 MHz Amateur Band and 430 MHz
Amateur Band to be one band and scan it when the scan mode is engaged.
Activate the scanner across the 144 MHz Amateur Band and 430 MHz Amateur Band.
Set Mode Item [F30 SCN.VTYPE]
Function: Select the Scan type.
Available Values: ROUND/RETURN
Default: ROUND
ROUND: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice versa).
RETURN: When the VFO frequency reaches the high band edge of the current band by
the upward scanning, the scanner will change to downward scanning (or vice versa).
Vertex Standard Co., Ltd.
50