Specifications

FCC ID: K6620275X40

IC ID: 511B-20275X40

FTM-10R Operating Manual

Set Mode Item [F31 SCN.UP/DN]

Function: Select the scan start direction which initiates the scanner using scan

command by pressing the [F] key.

Available Values: UP START/DWN.START

Default: UP START

Set Mode Item [F32 SHIFT]

Function: Sets the magnitude of the repeater Shift.

Available Values: 0.00 - 99.95 MHz (50 kHz increments)

Default: Depends on the operating band and transceiver version.

Set Mode Item [F33 SPEAKER]

Function: Select the Speaker to be used.

Available Values: REAR/F+R/FRONT/OFF

Default: REAR

REAR: Outputs the receiving audio from the REAR speaker (located in the transceiver’s

body).

F+R: Outputs the receiving audio from both FRONT (located in the front panel) and

REAR speakers.

FRONT: Outputs the receiving audio from the FRONT (located in the front panel)

speaker.

OFF: Disable the FRONT and REAR Speakers.

Set Mode Item [F34 SQL.LEVEL]

Function: Set the squelch threshold level.

Available Values: SQL OFF/SQL MIN/SQL 02/ SQL 03/ SQL 04/ SQL 05/ SQL 06/ SQL

07/ SQL MAX

Default: AM: SQL 02, FM: SQL 03

Set Mode Item [F35 SQL.TSQLF]

Function: Setting of the CTCSS Tone Frequency.

Available Values: 50 standard CTCSS tones

Default: 100.0 Hz

Set Mode Item [F36 SQL.DCODE]

Vertex Standard Co., Ltd.