Specifications

FCC ID: K6620275X40

IC ID: 511B-20275X40

FTM-10R Operating Manual

Function: Setting of the DCS code.

Available Values: 104 standard DCS codes

Default: DCS(023)

Set Mode Item [F37 SQL.EXPND]

Function: Enables/Disables split CTCSS/DCS coding.

Available OFF/ON

Default: OFF

When this Set Mode Item is set to “ON,” you will see the following additional

parameters after the “DCS” parameter while configuring Set Mode Item [F37 SQL

TYPE].

DCS ENC: DCS Encode only.

TONE DCS: Encodes a CTCSS tone and Decodes a DCS code.

DCS TSQL: Encodes a DCS code and Decodes a CTCSS tone.

Select the desired operating mode from the selections shown above.

Set Mode Item [F38 SQL TYPE]

Function: Selects the Tone Encoder and/or Decoder mode.

Available Values: OFF/TONE ENC/TONE SQL/REV TONE/DCS/

Default: OFF

TONE ENC: CTCSS Encoder

TONE SQL: CTCSS Encoder/Decoder

REV TONE: Reverse CTCSS Decoder (Mutes receiver when matching tone is received)

DCS

: Digital Coded Encoder/Decoder

Note: See also Set Mode Item [F37 SQL.EXPND] regarding additional selections

available during “Split Tone” operation.

Set Mode Item [F39 STEP]

Function: Setting of the synthesizer steps.

Available Values: 5.00/6.25/8.33/10.00/12.50/15.00/20.00/25.00/50.00/100.00/200.00 kHz,

or AUTO

Default: AUTO (Step automatically changes according to operating frequency.)

Set Mode Item [F40 STEREO]

Function: Select the audio output.

Available Values: STEREO/MONO

Vertex Standard Co., Ltd.