Specifications

FCC ID: K6620275X40
IC ID: 511B-20275X40
FTM-10R Operating Manual
Rear Panel Connectors
1. ANT Jack
Connect your antenna hear, using a type-M (PL-259) plug and coaxial cable.
2. DC 13.8 V Cable Pigtail w/Fuse
This is the power supply connection for the transceiver. Use the supplied DC cable to
connect this pigtail to the car battery or other DC power supply capable of at least 10
Amperes (continuous duty). Make certain that the red lead connects to the positive side
of the supply. The fuse is 15-A.
3. MIC Jack
Connect the optional MH-68A6J Hand Microphone to this jack.
4. LINE IN Jack
This 2-contact 3.5-mm mini phone jack
5. EXT SPK Jack
This 2-contact 3.5-mm mini phone jack provides receiver audio output for an optional
external speaker. The audio impedance is 4 Ohms, and the level varies according to the
setting of the front panel’s VOL control. Inserting a plug into this jack disables audio
from the transceiver’s internal speaker.
MH-68A6J Microphone Switches (Option)
1. PTT Key
Press this key activate the MH-68A6J’s microphone.
2. [DWN]/[UP] key
Press (or hold in) either of these keys to tune (or scan up or down) the operating
frequency or through the memory channels.
3. [PGM] key
This key is used programmable, allowing quick access to features used often.
In the USA version, pressing this key recalls the “Weather” broadcast channel bank. In
the EXP version, pressing this key activates T.CALL (1750 Hz) for repeater access.
You can reprogram this key for other functions, if desired. See page for details.
Vertex Standard Co., Ltd.
9