Specifications

20 FTM-10SR OPERATING MANUAL
INSTALLATION
CONNECTION AND SETTING
Use the Optional Handle Bar Bracket “MMB-M11”
1. If you use the Front Panel as a Mi-
crophone, connect the supplied Front
Panel Hanger using the supplied
screw.
2. If you do not use the Front Panel as a
Microphone, install the Front Panel
directly to the “MMB-M11”.
3. Select the Bracket and Rubber to fit
the size of the Handle Bar (Refer to
the table below).
Bracket (L)
Bracket (S)
Rubber (S-a: t=1 mm)
Rubber (S-b: t=2 mm)
Rubber (L-a: t=1 mm)
Rubber (L-b: t=3 mm)
Bar Bracket Rubber
7/8”
S
S-a & S-b
1” S-a
1-1/4”
L
L-a & L-b
1-1/2” L-a
¯
M5x15
M5x25
Flat Washer
Spring Washer
Spring Washer
Hex. Nut