Specifications

60 FTM-10SR OPERATING MANUAL
Installation of the optional BU-1 Bluetooth
®
Adapter Unit will enable, the FTM-10SR to
send/receive voice messages with the optional BH-1 Bluetooth
®
Headset via wireless
links.
Pairing
When using the Bluetooth
®
Headset for the first time, the Bluetooth
®
Headset and the
FTM-10SR must be paired.
P Bring the Bluetooth
®
Headset and the FTM-10SR close together when doing Pairing.
1. Turn the transceiver off.
2. Press and hold the
[
VOL/SEL
]
key while turning the power on again.
3. Rotate the DIAL knob to select the Bluetooth
®
Adapter Unit you wish to pair.
Main Chassis Bluetooth
®
Adapter Unit:
Menu Item “SF6 BLTH R”
Front Panel Bluetooth
®
Adapter Unit:
Menu Item “SF7 BLTH F”
Bluetooth
®
OPERATION
4. Press the PTT key.
The default PIN code (6111) appears.
You may change the PIN code, if desired, before continu-
ing with step 5.
1. Press the PTT key, and then rotate the DIAL knob to set the first digit of the PIN
code.
2. Press the key to save the first digit of the PIN code and move on to the next
place.
3. Repeat the previous steps to complete the PIN code. If you make a mistake, press the
key to move back to the incorrect number, then re-enter the correct number.
5. Make sure that the BH-1 is off.
6. Press and hold the power switch on the BH-1 Bluetooth
®
Headset for five seconds,
until the BH-1’s indicator blinks red/blue alternately.
7. Press the PTT key on the FTM-10SR to initiate the pairing.
8. If the pairing is successful (Requires a 20 to 30 seconds), “LINK OK” notation will
appear on the display. The FTM-10SR will turn off and back on again.
When the BH-1 Bluetooth
®
Headset is correctly recognized by the FTM-10SR , the
BH-1’s indicator will blink blue.