Owner`s manual

Page 19GX3000S
KEYPAD
[
16/9
]
Key
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the [16/9] key again reverts to the
previous selected working channel.
Secondary use
Press and hold the
[
16/9
]
key then press the
[
WX
]
key to switch the
Channel Group.
[
WX
]
Key
Immediately recalls the previously selected NOAA weather channel from
any channel.
Secondary use
Holding down the
[
16/9
]
key while pressing the
[
WX
]
key changes from
USA, International and Canadian channel groups.
[
PA/FOG
]
Key
Available to operate the 30 W PA function or the FOG HORN function.
[
SCAN
(
MEM
)]
Key
Press this key to start and stop the scanning of programmed channels.
Refer to section “10.12 SCANNING” for details.
Secondary use
To memorized a channel into scan memory, select the channel and press
and hold the
[
SCAN
(
MEM
)]
key until “MEM” is shown on the display.
To delete a memorized channel from scan memory, select the channel
and press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is removed from
the display.
[
DW/IC
)]
Key
Pressing this key enable dual watch between a priority channel (Ch16 is
the default) and a selected channel until a signal is recieved. When a
signal is recieved on the selected channel the radio will momentarily switch
to the Priority channel and listen for communications. Refer to section
“10.11 DUAL WATCH
(
TO PRIORITY CHANNEL
)
” for details.
Secondary use
Press and hold this key, when the optional RAM+ Mic or VH-310 Handset
is connected, intercom operation will operate between radio and option
mic or handset. Refer to section “10.15 INTERCOM OPERATION” for
details.