User's Manual

FT-950
Operating Manual
Vertex Standard Co., Ltd.
109
Menu Mode
The Menu system of the FT-950 provides extensive customization capability, so you can
set up your transceiver just the way you want to operate it. The Menu items are
grouped by general utilization category, and are numbered from “001 AGC FST DLY” to
“118 TGEN EMRGNCY”.
Using the Menu
1. Press the [MENU] button momentarily, to engage the Menu mode.
The display will show the Menu Number, Menu Group Name, and Menu Item.
Press the [SELECT] knob to toggle the display between “Menu Number & Menu
Group Name” and “Menu Item”. The Multi-Display Window shows the current
setting of the currently-selected Menu item.
2. Rotate the [SELECT] knob to select the Menu item you wish to work on.
3. Rotate the [CLAR/VFO-B] knob to change the current setting of the selected Menu
item.
4. When you have finished making your adjustments, press and hold in the [MENU]
button for two seconds to save the new setting and exit to normal operation. If you
only
momentarily press the [MENU] button, the new settings will not be retained.
Menu Mode Reset
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel [POWER] switch off.
2. Press and hold in the [MENU] button, and while holding it in, press the [POWER]
switch to turn the transceiver back on. Now release the [MENU] button.
AGC Group
001 AGC FST DLY
Function: Sets the delay time for the AGC FAST mode.
Available Values: 20 ~ 4000 msec (20 msec/step)
Default Setting: 300 msec
002 AGC MID DLY
Function: Sets the delay time for the AGC MID mode.
Available Values: 20 ~ 4000 msec (20 msec/step)
Default Setting: 700 msec