User's Manual

FT-950
Operating Manual
Vertex Standard Co., Ltd.
113
A2nO: Abbreviates to “A” for “One,” “N” for “Nine,” and “O” for “Zero.”
A2nt: Abbreviates to “A” for “One,” “N” for “Nine,” and “T” for “Zero.”
12nO: Abbreviates to “N” for “Nine,” and “O” for “Zero.”
12nt: Abbreviates to “N” for “Nine,” and “T” for “Zero.”
018 KEY CONTEST
Function: Enters the initial contest number that will increment/decrement after
sending during contest QSOs.
Available Values: 1 ~ 9999
Default Setting: 1
Advice: Press the [CLEAR] button to reset the contest number to “1”.
019 KEY CW MEM1
Function: Permits entry of the CW message for message register 1.
Available Values: tyP1/tyP2
Default Setting: tyP2
tyP1: You may enter the CW message from the Main Tuning Dial knob and
[CLAR/VFO-B] knob.
tyP2: You may enter the CW message from the CW keyer.
020 KEY CW MEM2
Function: Permits entry of the CW message for message register 2.
Available Values: tyP1/tyP2
Default Setting: tyP2
tyP1: You may enter the CW message from the Main Tuning Dial knob and
[CLAR/VFO-B] knob.
tyP2: You may enter the CW message from the CW keyer.
021 KEY CW MEM3
Function: Permits entry of the CW message for message register 3.
Available Values: tyP1/tyP2
Default Setting: tyP2
tyP1: You may enter the CW message from the Main Tuning Dial knob and
[CLAR/VFO-B] knob.
tyP2: You may enter the CW message from the CW keyer.