User's Manual

FT-950
Operating Manual
Vertex Standard Co., Ltd.
133
preventing IMD and blocking.
Installation
Assemble the RF µTuning Unit according to the “RF µTuning Kit Installation Manual”
supplied from the RF µTuning Kit.
Interconnections to FT-950
Connect each cable (supplied from the RF µTuning Kit) between the RF µTuning Unit
and the FT-950 Transceiver.
Advice:
 The RF connecting cables are color coded (black and gray) to assist in properly
connecting the RF IN and RF OUT jacks. (see illustration)
 Miss-connection will not damage the RF µTuning Kit. However, improper
operation may occur.
 Connect the color-coded control cable(s) between the CNTL OUT and CNTL IN
jacks (see illustration). Confirm all connections before turning on the transceiver.
 If the FT-950 does not operate and the frequency display blinks sometimes,
confirm and correct the “CNTL IN” and “CNTL OUT” connections on the RF
µTuning Unit.
 The order of connecting multiple RF µTuning Unit is not important.
Operation
Please see page ?? on this Operating Manual.