User's Manual

FT-950
Operating Manual
Vertex Standard Co., Ltd.
67
Parametric Gain
“092 TAUD EQ1 LVL” “–10” (–10dB) ~ “+10” (+10dB)
“095 TAUD EQ2 LVL” “–10” (–10dB) ~ “+10” (+10dB)
“098 TAUD EQ3 LVL” “–10” (–10dB) ~ “+10” (+10dB)
Q (Bandwidth)
“093 TAUD EQ1 BW” “1” ~ “10”
“096 TAUD EQ2 BW” “1” ~ “10”
“099 TAUD EQ3 BW” “1” ~ “10”
3-Stage Parametric Equalizer Adjustments (Speech Processor: “ON”)
Center Frequency
“100 TAUD EP1 FRQ” “100” (Hz) ~ “700” (Hz)
“103 TAUD EP2 FRQ” “700” (Hz) ~ “1500” (Hz)
“106 TAUD EP3 FRQ” “1500” (Hz) ~ “3200” (Hz)
Parametric Gain
“101 TAUD EP1 LVL” “–10” (–10dB) ~ “+10” (+10dB)
“104 TAUD EP2 LVL” “–10” (–10dB) ~ “+10” (+10dB)
“107 TAUD EP3 LVL” “–10” (–10dB) ~ “+10” (+10dB)
Q (Bandwidth)
“102 TAUD EP1 BW” “1” ~ “10”
“105 TAUD EP2 BW” “1” ~ “10”
“108 TAUD EP3 BW” “1” ~ “10”
Using the Speech Processor (SSB and AM Modes)
The FT-950’s Speech Processor is designed to increase “talk power” by increasing the
average power output, (via a sophisticated compression technique) and adjusting the
audio quality to the menu settings (“100 TAUD PE1 FRQ”, “103 TAUD PE2 FRQ”, “106
TAUD PE3 FRQ”. The result is improved intelligibility when conditions are difficult.
1. Adjust the [MIC GAIN] knob for SSB use, as described on page ??.
2. Press the [METER] button repeatedly to select “COMP” (Compression) meter.
3. Press the [PROC] button repeatedly until the “MIC EQ” and “PROC” icons will
appear in the display, confirming that the Speech Processor is engaged.
4. Press the [PTT] switch on the microphone, and speak into the microphone in a
normal voice level. Observe the deflection of the meter needle on the COMP meter
scale.