User's Manual

FT-950
Operating Manual
Vertex Standard Co., Ltd.
71
button must be off).
 Press the FH-2’s [1] ~ [5] key (whichever one you just recorded in). You will hear
the contents of the voice memory you just recorded.
Advice: You may adjust the playback level of the recording via Menu item “014 DVS RX
LVL”.
Transmitting the Recorded Message
 Select the LSB, USB, AM, or FM mode using the front panel [MODE] buttons.
 Press the front panel’s [BK-IN] button. A “BK-IN” icon will appear in the display.
 Press the FH-2’s [1] ~ [5] key (whichever one you just recorded in). The message
will be terminated.
Advice: You may adjust the transmit (audio) level of the recording via Menu item “015
DVS TX LVL.”
VOX (Automatic TX/RX Switching using Voice Control: SSB/AM/FM Modes)
Instead of using the microphone’s PTT switch or the front panel [MOX] switch to
activate the transmitter, the VOX (Voice Operated TX/RX Control) system provides
hands-free, automatic activation of the transmitter, based on voice input into the
microphone.
1. Press the [VOX] button to activate the VOX circuitry. The LED inside the [VOX]
button glows red.
2. Without pressing the PTT switch, speak into the microphone in a normal voice
level. When you start speaking, the transmitter should be activated automatically.
When you finish speaking, the transceiver should return to the receive mode (after
a short delay).
3. To cancel VOX and return to PTT operation, press the [VOX] button again. The
LED inside the [VOX] button will disappear, signifying that the VOX circuitry has
been turned off.
Advice:
 The VOX Gain may be adjusted, so as to prevent accidental transmitter activation
in a noisy environment. To adjust the VOX Gain:
 Press the [VOX] button to activate the VOX circuitry, if necessary.
 Press the [MENU] button to engage the Menu mode.
 Rotate the [SELECT] knob so as to select Menu item “115 TGEN V GAIN.”
Advice: Press the [SELECT] knob to toggle the Menu item display between