User manual

User Manual Rayocomp PS 1000 Polar Page 2-40
2.6.3 How can I analyse the values of the memory concerning the
correlating indications?
Select the Bio-resonance
according to Paul
Schmidt in the main
menu, then press the key
Memory management
and finally the key
Interference analysis
before working with the
required functions.
The picture you can see
on the right appears.
For example, you have just tested with the range value test and have met with
particularly strong blockades (+ and – resonances); now the interference
analysis can help you to find out, which indications are concealed behind the
discovered resonances and lead you towards a safe diagnostic. The right
window shows up the indications correlated to the interference values with grey
background in the left window. You my be interested in the correlations of the
+ and – resonances alone, then you can cancel the three resonance selection
buttons OR, N and +/- on the lower left. Now the left window displays the +
and – resonances alone. If you use the navigation keys to move between the
displayed interference values now, you will see only the correlations of these
resonances displayed on the right.
This function saves you the time-consuming search through the indication list
to find the corresponding indications.
If you have already entered own interference values (see answer to question
7.2.4), these will, of course, also be displayed, if they match.