Operation Manual

VX-450 SerieS Operating Manual
27
adVanced operatIon
scan
The Scanning feature is used to monitor multiple
signals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To activate scanning:
r
Press (or press and hold) the assigned Program-
mable key to activate scanning.
r
The scanner will search the channels of each
channel, looking for active ones; it will pause
each time it nds a channel on which someone is
speaking.
r
Press (or press and hold) the assigned Program-
mable key again to disable scanning. Operation
will revert to the programmed revert channel.
Note: Your dealer may have programmed your radio
to stay on one of the following channels if you press
the
PTT
switch during scanning pause:

“Scan Pause” channel (“Talk Back”)

“Last Busy” channel

“Priority-1/-2” channel

“User Programmed” channel (“Select Channel”)

“Scan Start” channel
group scan
The Scanning feature is used to monitor multiple
channels programmed into the transceiver. While
scanning, the transceiver will check each channel of
the programmed group for the presence of the signal,
and will stop on a channel if a signal is present.
Press (or press and hold) the assigned programmable
key to activate the scanning on the selected groups.