Operation Manual

VX-450 SerieS Operating Manual
30
adVanced operatIon
talK around
(
ta
)
Press (or press and hold) the assigned Programmable
key to activate the Talk Around feature when you are
operating on duplex channel systems (separate re-
ceive and transmit frequencies, utilizing a “repeater”
station). The Talk Around feature allows you to by-
pass the repeater station and talk directly to a station
that is nearby. This feature has no effect when you are
operating on “simplex” channels, where the receive
and transmit frequencies are already the same.
In the
VX-454/-459
, when the “TA” function is acti-
vated, the “ ” icon will be indicated on the display.
Note that your dealer may have mode provision for
“Talk Around” channels by programming “repeater”
and “Talk Around” frequencies on two adjacent chan-
nels. If so, the key may be used for one of the other
Pre-Programmed Functions.
Note: The Talk Around feature does not activate on
the Simplex Channel.
reset
Press (or press and hold) the assigned programmable
key to reset the RFC (Ready for Communication)
condition.
call 1 to call 5
Press (or press and hold) the assigned Programmable
key to send a 2-tone/5-tone sequential tone group
which is pre-dened.
code up/doWn
(
Vx-454 & Vx-459 only
)
Press (or press and hold) the assigned Programmable
key to select a 2-tone/5-tone encode code from the
pre-dened encode list.