Operation Manual

VX-4500/-4600 SerieS Operating Manual

talk arounD

Press (or press and hold) the assigned programmable key to activate the Talk

Around feature when you are operating on duplex channel systems (separate re-

ceive and transmit frequencies, utilizing a “repeater” station). The Talk Around

feature allows you to bypass the repeater station and talk directly to a station that

is nearby. This feature has no effect when you are operating on “simplex” chan-

nels, where the receive and transmit frequencies are already the same.

In the

VX-4600

, when the “TA” function is activated, the “ ” icon will be indi-

cated on the display.

Note that your Vertex Standard may have made provision for “Talk Around” chan-

nels by programming “repeater” and “Talk Around” frequencies on two adjacent

channels. If so, the key may be used for one of the other Pre-Programmed Func-

tions.

Note: The Talk Around feature does not activate on the Simplex Channel.

reSet

Press (or press and hold) the assigned programmable key to reset the RFC (Ready

for Communication) condition.

call 1 to call 5

Press (or press and hold) the assigned programmable key to send a 2-Tone or

5-Tone sequential burst which is pre-programmed.

coDe up/Down

(

This function is only available in the

VX-4600

)

Press (or press and hold) the assigned programmable key to select a 2-Tone or

5-Tone encode code from the pre-programmed encode list.

adVanced operatIon