Operation Manual

VX-4500/-4600 SerieS Operating Manual
21
adVanced operatIon
StatuS up/Down
(
This function is only available in the
VX-4600
)
Press (or press and hold) the assigned programmable key to select a 5-tone status
code from the pre-dened status list.
StatuS cHeck
(
This function is only available in the
VX-4600
)
Press (or press and hold) the assigned programmable key to check the 5-tone re-
ceive status code. When you press this key, the display will indicate the “Message”
corresponding to the receive status condition per the pre-dened status list.
Duty
Press (or press and hold) the assigned programmable key to toggle the Duty func-
tion of the 2-tone/5-tone decoder “On” and “Off”.
When the Duty function is set to “On”, the user will always hear (depending on
the sub-audio signaling) all trafc on the paging channel. The radio will sound the
paging alert when it receives the programmed 2-tone/5-tone code.
When the Duty function is set to “Off”, the user will NOT hear normal radio traf-
c on the paging channel. The radio will sound the paging alert and unmute only
when it receives the programmed 2-tone/5-tone code.
iD cHeck
(
This function is only available in the
VX-4600
)
This function allows logged ID of the DTMF Signaling and 5-tone Signaling to be
reviewed and relayed (5-tone Signaling only) to a specic station:

Press (or press and hold) the assigned programmable key to display the logged
ID of the DTMF Signaling and 5-tone Signaling.

Press the
[
P4
]
key to select the category (“DTMF Signaling” or “5-tone Sig-
naling”) to be reviewed, then press the
[

]
/
[

]
keys to select the ID.

Press the
[
P2
]
key to toggle the display between the “ID code display” and “Tag
display”.

Press the
[
P1
]
key to send the Call back, when recalling the ID of the “5-tone
Signaling”, if desired.
option SwitcH 1
Activates the optional accessory “1” while pressing the assigned programmable
key.
option SwitcH 2
Press the assigned programmable key to toggle the optional accessory “2” “On”
and “Off”.