Operation Manual

VX-4500/-4600 SerieS Operating Manual
24
user set mode
The
VX-4600
includes a “User Set” (Menu) Mode which allows the user to dene
or congure various settings, such as Squelch, Display contrast, etc. To activate
the “User Set” (Menu) Mode:

Press the programmable key assigned to the “
SET
” function.

Select the User Set Mode item you wish to change using the
[
P1
]
/
[
P2
]
keys,
then use the
[

]
/
[

]
keys to adjust the setting of the selected item.

Press the
[
P4
]
key to store the new conguration.
You may cancel the selection by pressing the
[
P3
]
key.

Press the programmable key assigned to the “
SET
” function to exit to normal
operation.
Note: The Menu item “
REC
” and “
PLAY
” will appear only when the optional
DVS-8
Voice Storage Unit is installed.
dIsplay
SQL
Sets the Squelch level.
Beep
Enables/Disables the Key Beeper.
Bell
Enables/Disables the Bell function.
(alert tone activated by incoming signaling)
Enables/Disables the back light of the display and keypad.
Key
Enables/Disables the Key Lock function.
PTT
Enables/Disables the PTT Lock function.
DIMMER
Sets the LCD Brightness level.
Scan
Engages/Disengages Scanning.
DW
Engages/Disengages Dual Watch.
AF
Sets the minimum Audio Volume level.
CONTRAST
Sets the LCD Contrast level.
VOX
Sets the VOX Gain level.
Encryption
Enables/Disables the disabling the Encryption Unit temporarily.
ENB: Enables the disabling the Encryption Unit.
DIS: Disables the disabling the Encryption Unit.
TX Save
Enables/Disables the TX Save function.
REC
Select the Recording mode.
ONE
: Enables one-shot recording of audio for 120 seconds, with
playback from beginning of the message.
ROL
: Enables rolling recording so long as the receiver is passing audio,
with playback of the last 120 seconds recorded.
PLAY
Select the priority system audio during recorder playback.
PLAY
: The recorded audio is higher priority than the received signals
audio.
SIG
: The received signal’s audio is higher priority than the playback
audio.