Specifications

VX-5R OPERATING MANUAL 61
Set Mode
Set Mode Details
Set Item 1
[
SQUELCH
]
Function: Set the Squelch threshold level for the AM and FM-Narrow modes.
Available Values: 0 ~ 15
Default: 01
Set Item 2
[
WFM SQL
]
Function: Set the Squelch threshold level for the FM-Wide mode.
Available Values: 0 ~ 15
Default: 02
Set Item 3
[
NAME SET
]
Function: Store Alpha-Numeric “Tags” for the Memory channels.
Name Storing:

Recall the memory channel to be named.

Recall Menu Item 3, then press the
[
BAND
(
SET
)
AR
]
key momentarily.

Turn the DIAL to select the desired first letter, number, or symbol, then press the
[
BAND
(
SET
)
AR
]
key momentarily to save the first letter/number/ symbol.

Repeat the previous step as necessary to complete, pressing the
[
BAND
(
SET
)
AR
]
key after each entry.

Press the PTT key momentarily to save the your new setting and exit to normal operation.
>> , , , =, ,
–
, CHR >>

: Depends on the transceiver version.
Ite m
#
Menu Item Function Available Valu es Default
30
TONE SET Setting of the CTCSS Tone Frequency 39 standard CTCSS tones 100 Hz
31
DCS SET S etting of the D C S code 104 standard DCS codes 023
32
DTMF SET Programming the DTMF Autodialer - -
33
CW ID Programming and activate the CW IDer - -
34
SPEC-ANA-
L
Select the Spectrum Analyzer Sweep mode SINGLE/CONTINUE SINGLE
35
SMRT
SRCH
Select the Smart Search Sweep mode SINGLE/C ONTINUE SINGLE
36
RX MODE Select the Operating mode AUTO/N-FM/W-FM/AM AUTO
37
LOC K
MODE
Select the Control Locking lockout
combination
KEY/DIAL/PTT/KEY+DIAL/
KEY+PTT/DIAL+PTT/ALL
KEY
38
HALF DEV Reducing the Deviation level by 50% ON/OFF OFF
39
LANGUAGE Select the language for the Set (menu) mode ENGLISH/JAPANESE ENGLISH
40
ON TIMER Set the ON Timer time OFF ~ 24:00 OFF
41
CONTRAST S e tting o f the D isp lay contrast level 1 ~ 10 5
42
MTR SYMB Select the S/PO meter Symbol
43
BARO
OFST
C orre cting the a tm ospheric p ressure -500 ~ +500 hpa (mb)
0 hpa
(m b)
44
ALTI OFST Correcting the altimeter setting -500 ~ +500 m 0 m
45
DISP MODE
Select the display
while the Transceiver's power is off
NONE/TEMP/BARO/ALTI/
TEMP+BARO/
TEMP+ALTI/ALL
NONE