Specifications

VX-5R OPERATING MANUAL64
Set Mode
Set Item 17
[
BUSY LED
]
Function: Enable/disable the BUSY LED while the Squelch is open.
Available Values: ON/OFF
Default: ON
Set Item 18
[
ARTS BEEP
]
Function: Select the Beep option during ARTS operation.
Available Values: IN RANGE/ALWAYS/OFF
Default: IN RANGE
IN RANGE: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other
station (every 15 or 25 seconds when in range).
OFF: No alert beeps sound.
Set Item 19
[
ARTS ITVL
]
Function: Select the Polling Interval during ARTS operation.
Available Values: 15 SEC/25 SEC
Default: 25 SEC
This setting determines how often the other station will be polled during ARTS operation.
Set Item 20
[
KEY BEEP
]
Function: Enable/disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
Set Item 21
[
EDGE BEEP
]
Function: Enable/disable the Band-edge beeper while scanning.
Available Values: ON/OFF
Default: OFF
When this feature “ON,” a beep will sound when the scanner reaches the band edge (dur-
ing VFO Scanning) or when it reaches Memory channel “1” (during Memory Channel
Scanning).
Set Item 22
[
BELL
]
Function: Select the CTCSS Bell ringer repetitions.
Available Values: OFF/1/3/5/8/REPEAT
Default: OFF