Service manual

19VX-4500/-4600 Series UHF FM Transceiver Service Manual
Alignment
DCS Deviation <Wide> / <Narrow>
This parameter is to align “DCS Deviation” of the selected channel.
1. Press the “DCS Dev (W/N)” button to start the alignment.
The DCS Deviation Alignment window will appear.
2. Click the left mouse button on the slide bar or press the Up
/ Down arrow key, to select the desired channel.
3. Click the “PTT” button or press the “SPACE” bar the radio
starts to transmit with DCS Code on the selected channel.
4. Set the value to get desired deviation (Wide: 0.6 kHz, Nar-
row: 0.3 kHz) on the deviation meter by dragging the slide
bar, clicking the up-down button, pressing the left or right
arrow key, or entering the value in the entry box on the
selected channel.
5. After getting the desired deviation click the “PTT” button
or press the “SPACE” bar to stop transmitting.
6. Click the “OK” button to finish the DCS Deviation align-
ment and save the data.
ADJ Type
Basic: “Low-edge / band center / high-edge“ and se-
lect the channel for alignment (Default).
Single: Alignment value changes only on the selected
channel.
All Freq: Alignment value changes on all channels.
«