Service manual

23VX-4500/-4600 Series UHF FM Transceiver Service Manual
Installation of Option
The DVS-8 is a Voice Storage Unit which allows you to record
and play back incoming receiver audio.
The DVS-8 is is easily programmed the configulations using a
Vertex Standard CE115 programmer with an IBM PC-compat-
ible computer.
1. Disconnect the DC power cable.
2. Referring to Figure 1, grasp the Top Case Cover with both
hands, Lift up the Top Case Cover to remove while sprend
both side of the Top Case Cover.
3. Referring to Figure 2, remove the Shield Case Cover.
4. Referring to Figure 3, locate the empty connector for the
Optional Unit, connect the Optional Unit here.
5. Replace the Shield Case Cover, then replace the Top Case
Cover. Installation is now complete.
Figure 1 Figure 2
Figure 3