Specifications

VX-7R OPERATING MANUAL14
SELECTING THE OPERATING BAND
In the factory default configuration, the VX-7R operates in the “Dual Receive” mode.
During Dual Receive operation, the “Main” band frequency will be displayed on the upper
side of the LCD, and the “Sub” band frequency will be displayed on the lower side, with
the “Operating” band (the band on which transmission and band/frequency change are
possible) being indicated in large characters, and “Receive only” band being indicated in
small characters.
To switch the “Operating” band, press the key momentarily to engage the “Main”
band frequency as the “Operating” band. Alternatively, press the key momentarily to
engage the “Sub” band frequency as the “Operating” band, described previously.
Press and hold in the or key for 1/2 seconds to switch to Mono Band Operation
with a double-size display.
During Mono band operation, you may press the key, then press the / key, to
change the display to show only large characters.
The “Sub” band frequency may only be used on the amateur bands, even if it
is designated as the “Operating” band. Extended receiver coverage is only
possible on the “Main” band.
OPERATION
Press key
Press key
Press and hold key Press and hold key
Press and hold
key
Press Æ / key
Press key
Press key
Press key
Press key
Press Æ / key
Press and hold
key
Press and hold
key
Press and hold
key