Specifications

VX-7R OPERATING MANUAL28
Manual Repeater Shift Activation
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press the key, then press the key to enter the Set mode.
2. Rotate the DIAL to select the Menu Item labeled (Basic
Setup #7: RPT SHIFT).
3. Press the or key to select the desired shift among
“–RPT,” “+RPT,” and “SIMP.”
4. Press the PTT key to save the new setting and exit to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press the key, then press the key to enter the Set mode.
2. Rotate the DIAL to select the Menu Item labeled (Basic
Setup #6: SHIFT).
3. Press the or key to select the new repeater shift
magnitude.
4. Press the PTT key to save the new setting and exit to normal operation.
If you just have one “odd” split that you need to program, don’t change the
“default” repeated shifts using this Menu Item! Enter the transmit and re-
ceive frequencies separately, as shown on page 46.
REPEATER OPERATION
ADVANCED OPERATION