Specifications
VX-7R OPERATING MANUAL 39
To send the telephone number:
1. Press the key, then press the key to enter the Set mode.
2. Rotate the DIAL to select the Menu Item labeled (TSQ/DCS/DTMF #7: DTMF DI-
ALER).
3. Press the or key to set the DTMF Autodialer
function to the “ON” position.
4. Press the PTT switch to exit to normal operation and acti-
vate the DTMF Autodialer function (the “ ” icon will
appear).
5. In the Autodialer function mode, first press the PTT key,
then press the numerical key ( through ) correspond-
ing to the DTMF memory string you wish to send. Once the string begins, you may
release the PTT key, as the transmitter will be held “on the air” until the DTMF string
is completed.
EMERGENCY CHANNEL OPERATION
The VX-7R includes an “Emergency” feature which may be useful if you have someone
monitoring on the same frequency as your transceiver’s UHF “Home” channel. See page
47 for details on setting the Home channel.
The “Emergency” feature is activated by pressing the key for 1/2 seconds.
When this is done, (A) the radio is placed on the UHF amateur band Home channel, (B) it
emits a loud “Alarm” sound (the volume is controlled by the VOLUME knob), (C) it
flashes the STROBE in sequential colors, (D) if you press the PTT key, you will disable
the Emergency feature temporarily; you can then transmit on the UHF Home channel, and
(E) two seconds after the PTT release, the Emergency feature will resume.
To disable the “Emergency” feature, press the key for 1/2 seconds or turn the radio Offf
by pressing and holding in the
(
PWR
)
switch for 2 seconds.
Use this feature if you are out for a walk and want a quick way of alerting a family member
as to a dangerous situation. The alarm sound may discourage an attacker and allow you to
escape.
1
)
Be sure to arrange with a friend or family member to be monitoring on the
same frequency, as there will be no identification sent via the Emergency
alarm sound. And do not transmit the alarm tone except in a true emergency!
2
)
The STROBE may be changed to another function via Menu Item
(
Misc Setup #5:
EMG SET
)
; see page 94.
ADVANCED OPERATION
DTMF OPERATION