Specifications

VX-7R OPERATING MANUAL 51
MEMORY MODE
REGULAR MEMORY CHANNEL OPERATION
Memory Group Operation
Memory Group Assignment
1. Recall the memory channel to be assigned to a Memory Group.
2. Press and hold in the key for 1/2 seconds, then press the numbered key ( ~ )
you want as the Memory Group for this channel.
3. Now memory channel data is copied into the Memory Group.
Memory Group Recall
1. Set the radio to the Memory mode on the “Main” Band by pressing the key, if
necessary.
2. Press the key, then press the key to recall the
Special Memory Menu.
3. Rotate the DIAL knob to select the “2 MR Group” mode.
4. Press the PTT switch to activate the “Memory Group” mode.
5. Rotate the DIAL knob to select the desired Memory Group
(“MG1” ~ “MG9”).
6. Press the key momentarily to lock in the selected
Memory Group.
7. In the Memory Group mode of operation, you can only select memory channels in the
current memory group (up to 48 channels).
8. To change the Memory Group to another Group, press the key momentarily, then
rotate the DIAL knob.
9. To exit from Memory Group operation, recall the Special Memory Menu (press +
) then change its setting to “1 OFF.”