Specifications

VX-7R OPERATING MANUAL54
ONE-TOUCH MEMORY MODE
The One-Touch feature allows you to recall up to ten favorite frequencies directly via the
numeric ( through ) keys.
One-Touch Memory Storage
1. Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
2. Press and hold in the key for 1/2 second.
3. Within five seconds of releasing the key, rotate the
DIAL to select the desired One-Touch Memory channel,
which will be labeled “OTM0” through “OTM9.”
4. Press the key once more to store the frequency into
the selected One-Touch Memory.
5. You still will be operating in the “VFO” mode, so you may now enter other frequen-
cies, and store them into additional One-Touch Memory locations, by repeating the
above process.
One-Touch Memory Recall
1. Set the VX-7R to Mono band operation on the “Main” band.
2. Press the key, then press the key to recall the Special Memory Menu.
3. Rotate the DIAL knob to select the “3 OTM” mode.
4. Press the PTT switch to activate the “One-Touch Memory”
mode.
5. Press the numeric key ( through ) corresponding to
the One-Touch memory you wish to recall.
6. To exit the One-Touch Memory mode, recall the Special
Memory Menu (press + ), then change its setting
to “1 OFF.”
MEMORY MODE